AGS Rubberized Bedliner/Undercoating Spray
AGS Rubberized Bedliner/Undercoating Spray

Rubberized Undercoating & Bedliner Aerosol 14oz.


(No Reviews)

Rubberized Undercoating & Beadliner

The only undercoating that can go directory over surface rust. Other undercoatings
mask rust allowing it to spread out of sight.
  • Applies directly over surface rust - all other undercoating trap rust and moisture allowing it to spread sight unseen
  • Seals out moisture and prevents corrosion
  • UV Resistant
  • Flexible, durable finish can also be used as a truck bedliner or undercoating
  • 50 state compliant

Preparation and Application Instructions:

  • Use a wire brush to remove loose rust, grease, and paint, make sure the surface is free of debris.
  • If necessary, use a mild solvent to remove greases and oils that could affect adhesion.
  • Featheredge any surrounding paint with 220 grit abrasive. Shake can for at least 2 minutes.
  • Apply AGS Bedliner/Undercoating 10” to 12" from the surface, apply in a side to side motion to achieve even coverage.
  • Single coats dry to the touch in 20 minutes and are thoroughly dry in 3-4 hours at 68°F.
  • For greater durability and thickness a second coat can be applied one hour after the first. Allow 8-12 hours for a full cure after the last coat.
  • One can, single coat covers roughly 10 square feet

Shipping calculated at checkout.

You may also like

AGS is the leading manufacturer of specialty lubricants.

Sorry, recommendations are empty