Rubberized Undercoating & Beadliner
The only undercoating that can go directory over surface rust. Other undercoatings
mask rust allowing it to spread out of sight.
- Applies directly over surface rust - all other undercoating trap rust and moisture allowing it to spread sight unseen
- Seals out moisture and prevents corrosion
- UV Resistant
- Flexible, durable finish can also be used as a truck bedliner or undercoating
- 50 state compliant
Preparation and Application Instructions:
- Use a wire brush to remove loose rust, grease, and paint, make sure the surface is free of debris.
- If necessary, use a mild solvent to remove greases and oils that could affect adhesion.
- Featheredge any surrounding paint with 220 grit abrasive. Shake can for at least 2 minutes.
- Apply AGS Bedliner/Undercoating 10” to 12" from the surface, apply in a side to side motion to achieve even coverage.
- Single coats dry to the touch in 20 minutes and are thoroughly dry in 3-4 hours at 68°F.
- For greater durability and thickness a second coat can be applied one hour after the first. Allow 8-12 hours for a full cure after the last coat.
- One can, single coat covers roughly 10 square feet
